compression deformation

英 [kəmˈprɛʃən ˌdiːfɔːˈmeɪʃn] 美 [kəmˈprɛʃən ˌdiːfɔːrˈmeɪʃn]

压缩变形

化学



双语例句

  1. The warm and ice-rich frozen soil under an outside load will generate relatively large compression deformation which greatly influences the stability of roadbed.
    高温–高含冰量冻土在外荷载作用下会产生较大的压缩变形,对路基稳定性产生极大影响。
  2. The utility model has the advantages of novel structure, high strength, small permanent compression deformation, good elasticity and superior flexibility and is a novel plastic high pressure hose.
    该管结构新颖、强度高、永久压缩变形小、弹性好,可挠性优良,适用范围广,是一种新型的塑料高压软管。
  3. Thermal Compression Deformation Constitutive Equation of 7039 Aluminum Alloy
    7039铝合金的热压缩变形本构方程
  4. For low elastic module piles which are often used in composite foundation, have to take compression deformation of piles into account in analysis of pile-soil interaction.
    在复合地基中常用的低刚度桩的桩-土相互作用分析中应当考虑桩身压缩的影响。
  5. The secondary compression deformation is not easy to break the wire like once compression and the existing compression wire can be adopted for assembly and production.
    二次紧压变形,不会发生像一次紧压那样容易断丝,并可以采用现有紧压导线装备生产。
  6. The basic property study of the automobile weather-strip seals compression deformation
    轿车密封条压缩变形的基础性能研究
  7. By comparing the load of compression deformation and that of compression buckling deformation, the critical relative thickness is derived.
    通过比较压缩变形载荷与压缩失稳变形载荷的大小,导出了临界相对厚度。
  8. Flow Behavior of 2026 Aluminum Alloy During Hot Compression Deformation
    2026铝合金热压缩变形流变行为研究
  9. Compression deformation characteristics of saturated bentonite and sand-bentonite mixtures
    饱和膨润土及其与砂混合物的压缩变形特性
  10. The effects of moisture content on the compression deformation and shear strength of a compacted clay by carrying out compression tests and direct shear tests are studied, and the mechanism of the influence from two aspects of soil structure and variation of matrix suction in clay are analyzed.
    通过室内压缩试验和直剪试验,研究了含水量对压实粘土的压缩变形与抗剪强度的影响,并从土体结构与土中基质吸力变化两个方面分析了作用机理。
  11. The shear, tension and compression deformation in beam section due to the horizontal and vertical force in interlayer are considered through introducing a generalized interlayer reaction modulus. This method improves the calculation accuracy, especially in the case of broken bi layer beams.
    通过引入广义夹层反应模量计入了夹层水平和竖向反力引起的梁截面的剪切和拉压形变效应,它有效地提高了计算精度,尤其是在双层梁结构有间断的场合。
  12. The slope surface compression deformation and subsidiary stresses change rules with different elastic modulus of crush rock slope under different prestressed anchorage structures were investigated.
    研究了不同的预应力锚固结构作用下,在不同弹性模量的破碎岩质边坡中产生的压缩变形和附加应力变化规律。
  13. The wood of poplar is compressed, then the compression deformation is fixed by high temperature steam and heating.
    采用高温水蒸气处理和加热处理固定大青杨木材压缩变形,并对两种处理结果进行比较。
  14. The Compression Deformation Behavior of semi-solid alloy Al-Si-Cu-Mg was investigated for its wide application in this work.
    本文对半固态Al-Si-Cu-Mg合金的压缩变形特性进行实验研究。
  15. During compression process, the samples behave the nonlinear stress-strain relationships and the transient modulus increase with compression deformation.
    在压缩过程中,试样表现为非线性的应力应变关系,且瞬时模量随变形逐渐变大;
  16. Some problems about the determination of maximum admitted ball filling angle and the calculation of pressure or compression deformation on outer ring during assembling for deep groove ball bearings are discussed. Related formulas are also given in this paper.
    本文对怎样确定深沟球轴承的最大容许填球角以及在装配过程中外圈的压力或压缩变形最小应取多少等问题进行了讨论,给出了具体计算公式。
  17. This kind of structure model of two times of vertical movement deformation and one time of horizontal compression deformation is the structure basis of the order of Liaohe Group sequences.
    这种两次垂直运动变形和一次水平挤压运动变形的构造模式是决定辽河群层序有序性的构造基础。
  18. An analysis model is proposed, in which the energy loss of fragments in the penetrating course is transmitted into the strain energies of steel hull due to the compression deformation and annular shear plastic deformation.
    首先给出穿透过程的分析模型,认为钢破片对船体钢靶的穿透能主要包括:弹、靶挤压塑性变形能和环向剪切塑性变形能;
  19. Effect of Sn and Si Contents on the Flow Stress in Compression Deformation for Al-Sn-Si Alloys at Room Temperature
    Sn和Si含量对Al-Sn-Si合金室温压缩变形流变应力的影响
  20. Soaking leads to a significant increase in compression deformation and a significant reduction in shear strength and cohesion.
    压实粘土浸水饱和后,压缩变形显著增加,抗剪强度和粘聚力则显著降低。
  21. Temperature, friction and deformation velocity all have effects on the whole process of twist compression deformation.
    成形的温度、摩擦和变形速度对整个变形过程都产生较大的影响。
  22. Fault fracture network system resulting from compression deformation provided pathway for migration of ore fluid.
    由挤压变形事件产生的断层-裂隙网络为含矿流体向上运移提供了通道。
  23. With mining the protective layer, the lower protected layer experiences compression deformation first, then expansion deformation.
    随着保护层的开采,下被保护层先经历压缩变形,而后发生膨胀变形。
  24. Through the use of finite element analysis software for seal compression deformation simulation.
    通过利用有限元分析软件进行密封条的压缩变形模拟分析。